Alcatel-Lucent OmniSwitch AOS Release 7 - Index

OmniSwitch AOS 7 Network Configuration Guide March 2011 Index-1
Index
qos log lines command 21-36
qos stats interval command 21-38
Numerics
10/100/1000 ports
defaults 1-3
802.1AB 10-1
defaults 10-2
specifications 10-2
verify information about 10-14
802.1Q
enabling notification 10-10
trusted ports 21-26
802.3ad
see dynamic link aggregation
A
aaa ldap-server command
LDAP authentication 23-25
aaa radius-server command
RADIUS authentication 23-11, 23-13
Access Control Lists
see ACLs
access list 15-15
creating 15-15
ACLs
interaction with VRRP 18-10, 18-19
Layer 2 21-59
Layer 3 21-60
Layer 3 application examples 21-61
multicast 21-62
security features 21-63
actions
combined with conditions 21-28, 21-29
creating policy actions 21-42
Address Resolution Protocol
see ARP
alerts 28-8
Application example
Learned Port Security Configuration 25-3
application example
VLAN Stacking 11-2, 11-35
application examples
authentication servers 23-4
Configuring 802.1AB 10-2
DHCP Relay 17-4, 17-7, 17-8
dynamic link aggregation 7-4, 7-27, 8-5
ICMP policies 21-72
IP 11-4
IPMS 20-36, 20-38
IPv6 13-4
Layer 3 ACLs 21-61
policies 21-69
policy map groups 21-56
Port Mapping 24-2, 24-6
port mirroring 26-4
port monitoring 26-6, 26-8
QoS 21-39, 21-69
RIP 15-3
RMON 26-11
Server Load Balancing 19-4
Spanning Tree Algorithm and Protocol 5-10, 5-44
static link aggregation 6-3, 6-10
switch health 26-13
switch logging 28-4
UDLD 2-3
VLANs 4-3, 4-11
VRRP 18-5, 18-26, 18-30
VRRP3 18-31
applied configuration 21-66
how to verify 21-68
ARP
clearing the ARP cache 11-13
creating a permanent entry 11-12
deleting a permanent entry 11-13
dynamic entry 11-12
filtering 11-14
local proxy 11-14
arp command 11-12
arp filter command 11-14
assigning ports to VLANs 4-7
Authenticated Switch Access
LDAP VSAs 23-20
authentication servers
application example 23-4
defaults 23-3
how backups work 23-5
see LDAP authentication servers, RADIUS authentication
servers
automatic IP configuration 17-12
B
backup router
VRRP 18-7
BGP IPv6
configuring 11-35
boundary port 5-18
BPDU
see Bridge Protocol Data Units
bridge 1x1 slot/port path cost command 5-37
bridge auto-vlan-containment commmand 5-32
bridge cist hello time command 5-27, 5-28, 5-29, 5-30
bridge forward delay command 5-30
bridge hello time command 5-28
bridge max age command 5-29, 5-31
bridge mode command 5-20
bridge msti priority command 5-28