Alcatel-Lucent OmniSwitch AOS Release 7 - Verifying 802.1 AB Configuration

Verifying 802.1AB Configuration Configuring 802.1AB
page 10-14 OmniSwitch AOS Release 7 Network Configuration Guide March 2011
Verifying 802.1AB Configuration
To display information about the ports configured to handle 802.1AB, use the following show command:
For more information about the resulting display, see Chapter 9, “802.1AB Commands,” in the
OmniSwitch CLI Reference Guide.
show lldp system-statistics Displays system-wide statistics.
show lldp statistics Displays port statistics.
show lldp local -system Displays local system information.
show lldp local -port Displays port information.
show lldp local-management-address Displays the local management address information.
show lldp network-policy Displays the MED Network Policy details for a given
policy ID.
show lldp med network-policy Displays the network policy configured on a slot or port. If
no option is specified, network policies configured on all
ports of the chassis are displayed.
show lldp remote-system Displays local port information of remote system.
show lldp remote-system med Displays MED local port information of remote system.