Server Load Balancing Specifications Configuring Server Load Balancing
page 19-2 OmniSwitch AOS Release 7 Network Configuration Guide March 2011
Server Load Balancing Specifications
The table below lists specifications for Alcatel-Lucent’s SLB software.
Platforms Supported OmniSwitch 10K
Maximum number of clusters 32
Maximum number of physical servers per cluster 32
Layer-3 classification Destination IP address
QoS policy condition
Layer-2 classification QoS policy condition
Server health checking Ping, link checks
High availability support Hardware-based failover, VRRP, Chassis
Management Module (CMM) redundancy
Networking protocols supported Virtual IP (VIP) addresses
Maximum number of probes on a switch 40
To Next Page
Loading...
