Alcatel-Lucent OmniSwitch AOS Release 7 - Displaying Source Learning Information

Displaying Source Learning Information Managing Source Learning
page 3-10 OmniSwitch AOS Release 7 Network Configuration Guide March 2011
Displaying Source Learning Information
To display MAC Address Table entries, statistics, and aging time values, use the show commands listed
below:
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide.
show mac-learning Displays a list of all MAC addresses known to the MAC address
table, including static and multicast MAC addresses.
show mac-learning aging-time Displays the current MAC address aging timer value by switch or
VLAN.
show mac-learning mode Displays the current status of the distributed MAC source learning
mode.