Alcatel-Lucent OmniSwitch AOS Release 7 - Verifying the Vrrpv3 Configuration

Verifying the VRRPv3 Configuration Configuring VRRP
page 18-24 OmniSwitch AOS Release 7 Network Configuration Guide March 2011
Verifying the VRRPv3 Configuration
A summary of the show commands used for verifying the VRRPv3 configuration is given here:
For more information about the displays that result from these commands, see the OmniSwitch CLI Refer-
ence Guide.
show vrrp3 Displays the VRRPv3 virtual router configuration for all virtual routers
or for a particular virtual router.
show vrrp3 statistics Displays statistics about VRRPv3 packets for all VRRPv3 virtual rout-
ers configured on the switch or for a particular virtual router.
show vrrp3 track-association Displays the tracking policies associated with VRRPv3 virtual routers.