Diagnosing Switch Problems Monitoring Switch Health
OmniSwitch AOS Release 7 Network Configuration Guide March 2011 page 26-43
Displaying Health Threshold Limits
The show health configuration command is used to view all current health thresholds on the switch, as
well as individual thresholds for input traffic (RX), output/input traffic (TX/RX), memory usage and CPU
usage.
To view all health thresholds, enter the following command:
-> show health configuration
Rx Threshold = 80,
TxRx Threshold = 80,
Memory Threshold = 80,
CPU Threshold = 80,
Sampling Interval (Secs) = 10
Note. For detailed definitions of each of the threshold types, refer to “Configuring Resource Thresholds”
on page 26-43, as well as Chapter 36, “Health Monitoring Commands,” in the OmniSwitch CLI Reference
Guide.
To Next Page
Loading...
