Alcatel-Lucent OmniSwitch AOS Release 7 - Queue Mapping Tables

page 21-16 OmniSwitch AOS Release 7 Network Configuration Guide March 2011
Queue Mapping Tables
This sections contains a unicast queue mapping table for each of the four pre-defined QSet profiles.
QSet Profile 1 (Default)
QSet Profile 2
Egress
Queue
ID
Queue
Type
Scheduling
Algorithm
Max BW
(% of Port
Rate)
802.1p ToS DSCP Notes
1 SP7 SP 100% 7 7 7.x Straight SP7
2 SP6 SP 100% 6 6 6.x Straight SP6 with starvation
3 SP5 SP 100% 5 5 5.x, 5.6 Straight SP5 with starvation
(“unprotected” EF)
4 SP4 SP 100% 4 4 4.x Straight SP4 with starvation
5 SP3 SP 100% 3 3 3.x Straight SP3 with starvation
6 SP2 SP 100% 2 2 2.x Straight SP2 with starvation
7 SP1 SP 100% 1 1 1.x Straight SP1 with starvation
8 SP0 SP 100% 0 0 0 Straight SP0 with starvation
Egress
Queue
ID
Queue
Type
Scheduling
Algorithm
Max BW
(% of Port
Rate)
802.1p ToS DSCP Notes
1EFSP 20% ––5.6 Protected EF
2 SP7+SP6 SP 100% 7, 6 7, 6 7.x, 6.x Straight SP 7 and 6 max (effective
CIR = PR minus EF PIR)
3 SP5 SP 100% 5 5 5.x Straight SP5 with starvation
4 SP4 SP 100% 4 4 4.x Straight SP4 with starvation
5 SP3 SP 100% 3 3 3.x Straight SP3 with starvation
6 SP2 SP 100% 2 2 2.x Straight SP2 with starvation
7 SP1 SP 100% 1 1 1.x Straight SP1 with starvation
8 SP0 SP 100% 0 0 0 Straight SP0 with starvation