Alcatel-Lucent OmniSwitch AOS Release 7 - Page 217

Configuring 802.1AB Quick Steps for Configuring 802.1AB
OmniSwitch AOS Release 7 Network Configuration Guide March 2011 page 10-3
3 To control per port management TLV to be incorporated in the LLDPDUs, use the
lldp tlv management command. For example:
-> lldp port 2/47 tlv management port-description enable
4 Set the transmit time interval for LLDPDUs. To set the timer for a 50 second delay, use the
lldp transmit interval command. For example:
-> lldp transmit interval 50
5 Set the minimum time interval between successive LLDPDUs. To set the interval for a 20 second
delay, use the lldp transmit delay command. For example:
-> lldp transmit delay 20
6 Set the LLDPDUs transmit fast start count required for LLDP Fast Restart mechanism to be activated.
Note. Optional. Verify the LLDP per port statistics by entering the show lldp statistics command. For
example:
-> show lldp statistics
----------+--------------------------------------+---------------------+----------
| LLDPDU | TLV | Device
Slot/Port| Tx Rx Errors Discards | Unknown Discards | Ageouts
----------+--------+----------+----------+----------+----------+----------+-----
1/23 52 0 0 0 0 0 0
2/47 50 50 0 0 0 0 0
2/48 50 50 0 0 0 0 0