Publication 1394-5.0 — May 2000
9-8 Troubleshooting
Finding CNC Interface Faults
Faults for the CNC Interface appear on the second line of the operator
panel. There is also an error log that contains the most recent system
faults. To get to this error log screen:
1. At the main menu, press the continue softkey. The softkey menu
changes.
2. Press the {ERROR MESAGE} softkey. The error message screen
appears.
For more information on 9/Series system faults refer to the 9/Series
Integration and Maintenance Manual (catalog 8520-6.2).
To Next Page
Loading...
Need help?
General
