Publication 1394-5.0 — May 2000
D-8 Catalog Numbers
1326AS Servo Motors
1326 Shaft Oil Seal Kit for 1326AS Motors
Ty p e
Bulletin
Number
1326
Voltage
Frame
Series
Motor
Length
Motor
Winding
Designator
Flange
and Shaft
Series
Standard
Options
AS = Rare Earth AC Servomotor
B = 460V AC
3 = 75 mm (Approximate stator size)
4 = 100 mm (Approximate stator size)
6 = 150 mm (Approximate stator size)
8 = 200 mm (Approximate stator size)
Sequentially numbered to indicate the magnet stack length within a given
frame size
Letter designation for rated motor speed
1
21 = IEC metric flange with keyway
K3 = 2.26 N-m (20 lb-in.) Holding brake with 24V DC coil for 1326AS-B3 frame series
K4 = 10.2 N-m (90 lb-in.) Holding brake with 24V DC coil for 1326AS-B4 frame series
K6 = 36.7 N-m (325 lb-in.) Holding brake with 24V DC coil for 1326AS-B6 frame series
K8 = 50.9 N-m (450 lb-in.) Holding brake with 24V DC coil for 1326AS-B8 frame series
xxxxx
= Special design options (factory assigned)
1
Refer to the
Servo Motor Performance Data
section in
Appendix A
for the rated speeds of the entire 1326AS Series family of motors.
Bulletin
Number
0041
Series
5065 = Nitrile shaft seal for 1326AS-B3
xxxx
motors
5066 = Nitrile shaft seal for 1326AS-B4
xxxx
motors
5067 = Nitrile shaft seal for 1326AS-B6
xxxx
motors
5053-005 = Nitrile shaft seal for 1326AS-B8
xxxx
motors
To Next Page
Loading...