Publication 1756-UM514B-EN-P - February 2003
Connecting a ControlLogix Controller to Remote I/O 10-3
Configure 1756-DHRIO Module
Use RSLogix 5000 to configure the 1756-DHRIO module. Figure 10.2
shows some sample configuration screens for the 1756-DHRIO
module in this example.
Figure 10.2
For more information on configuring a 1756-DHRIO module in a
remote I/O application, see
Chapter 9, or the RSLogix 5000 online
help.
Configure the FLEX Adapter
Use RSLogix 5000 to configure the FLEX adapter. Figure 10.3 shows
some sample configuration screens for the FLEX adapter in this
example.
Figure 10.3
For more information on configuring a FLEX adapter in a remote I/O
application, see
Chapter 9, or the RSLogix 5000 online help.
2
3
To Next Page
Loading...
