Rockwell Automation Publication IASIMP-QS035B-EN-P - April 2015 37
Add a Kinetix 5500 Drive to a Logix Designer Application Chapter 1
The New Tag dialog box opens.
12. Type the axis Name.
AXIS_CIP_DRIVE is the default Data Type.
13. Click Create.
The axis (Axis_1 in this example) appears in the Controller Organizer under Motion Groups>Ungrouped Axes and
is a
ssigned as Axis 1 on the Associated Axes tab.
14. On the Module Properties dialog box, click Apply.
To Next Page
Loading...
