Communications Mode
Infra-red Communications
The Infra-red Communications feature allows the control to com-
municate with an external device. The control can be program-
med and have its data read without using the keypad.
How to Begin Communications with an External
Device
The control will go blank and the display will show -C- until the
communication is complete. If an error occurs that terminates
communication, the display will show EIxx (xx represents the
error code).
NOTE: The Infra-red Communications option must be
turned on. Refer to IR Access (Enable/Disable) IrA in Pro-
gramming the Control.
Communications Mode
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
67 Part No. F8238101ENR11
To Next Page
Loading...
