Allied Telesis AT-8000S Series User Manual

Page 30
Allied Telesis AT-8000S Switch
Web Browser Interface User’s Guide
– Network Mask — Defines the network mask of the source IP address.
– Prefix Length — Defines the number of bits that comprise the source IP address prefix, or the network
mask of the source IP address.
• Action — Defines the action attached to the access rule. The possible field values are:
– Permit — Permits access to the device.
– Deny — Denies access to the device. This is the default.
3. Define the fields.
4. Click Apply. The access profile is saved and the device is updated.
5. Click Save Config on the menu to save the changes permanently.

Allied Telesis AT-8000S Series Specifications

General

Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Humidity	5% to 95% non-condensing
Switching Capacity	104 Gbps
Forwarding Rate	77.4 Mpps
VLANs	4, 094
Layer 3 Features	Static routing, RIP v1/v2
Management	Web-based
Operating Humidity	10% to 90% non-condensing