PAGE102
Attention: RISK OF OVERTURNING
The system cannot prevent the machine from overturning in the event of sudden changes in the slope of
the ground or curbs.
It is strictly forbidden to face sudden changes in slope, curbs, dips, holes or bumps in translation.
It is the operator's full responsibility to check the suitability of the terrain on which he must move.
5.1.4.2.2 Traction and steering control with FAST DRIVE and BOOSTER function.
The FAST DRIVE and BOOSTER functions are controlled by the button (16). These automatic functions
allow you to move at high speed and / or in straight-line travel, by activating only the right control
joystick (2).
When the button (16) is pressed, automatic activation of the horn signals that the function has been
activated (1 blow of the horn) or deactivated (2 blows of the horn):
If the machine is in TRANSPORT CONFIGURATION, the FAST DRIVE + BOOSTER function is active. Traction
control with the right joystick only (2):
- The traction control is activated in the direction of travel selected by the joystick;
- The machine moves straight ahead at a speed proportional to the movement of the joystick,
with an accelerated thermal engine;
- Steering is not possible. To obtain steering, the function must be deactivated by pressing the
button (16) again after stopping the manoeuvre.
If the machine is OUT OF THE TRANSPORT CONFIGURATION, the FAST DRIVE function is active. Traction
control with the right joystick only (2):
- The traction control is activated in the direction of travel selected by the joystick;
- The machine moves straight ahead at the safety speed, proportional to the movement of the
joystick, with an accelerated thermal engine;
- Steering is not possible. To obtain steering, the function must be deactivated by pressing the
button (16) again after stopping the manoeuvre.
To Next Page
Loading...
Need help?
General