PAGE90
5.1.3.6.5 START button.
The START button (13) is used to activate the controls of the push-button panel when the machine is
switched on when the message PRESS START appears on the display after the acoustic warning signal has
been activated, which signals that the control system has been switched on.
5.1.3.6.6 HORN button.
The HORN button (15) must be activated when you intend to signal the movement of the machine by
alerting personnel potentially within the range of action of the machine.
5.1.3.6.7 "MANUAL" function activation button.
By simultaneously activating the MANUAL button (14) and the joystick (1) it is possible to manually control
the levelling of the turntable rotation plane when the platform is in TRANSPORT condition. The movement
obtained is congruent with the action on the joystick.
With no load on the platform, it is possible to control the manual levelling up to the end-of-stroke
positions; with a load on the platform, it is possible to control the manual levelling up to obtain a
maximum inclination of the rotation plane of 5° absolute.
5.1.3.6.8 Safety key (only for RADIO CONTROL version).
The safety key (12) is used to activate the control push-button panel. Insert the supplied key to activate
the push button panel. If the key is not inserted, the push button panel will not be activated.
The key is coded, therefore use only the supplied key; it is not possible to activate the push-button panel
with the key of another push-button panel.
5.1.3.6.9 Radio remote control additional battery (only for RADIO CONTROL version).
The battery (17) is used to operate the control
push-button panel (radio control only). A second
battery with a relative battery charger is always
available on the machine, which keeps it charged
in case of need. The backup battery is located in
the compartment shown alongside.
To Next Page
Loading...
Need help?
General