To start the machine, the operator must:
- Release the ground control station
emergency stop button (2) by turning it
clockwise by a quarter of a turn;
- Turn the key selector (1) of the ground
control station, bringing it to the position
represented by the blue box (platform
controls);
- Remove the ignition key and deliver it to
a responsible person trained in the use of
the emergency recovery controls who
remain on the ground (for machines in
AUSTRALIA and NEW ZEALAND where the
key remains in the selector);
- Enter the platform and attach the safety
harness to the anchor points;
- On the platform push-button panel,
release the emergency stop button (3) by
turning it clockwise by a quarter of a turn;
- Press the START button (4) to make the
push-button panel operational
To Next Page
Loading...
Need help?
General