Operating manual ALPHASEAPILOT MFC Issue 1.1 Page 24 of 84
ALPHASEAPILOT MFC
2.12 The Rotary SET COURSE Control
2.13 The CANCEL & CONFIRM Keys
2.14 The Control Unit Start Up Display (Splash Screen)
2.15 The Control Unit Operational Display
Sea Trials:-
2.16 Sea Trials and Autopilot Type Selection
2.17 Mag/True Heading Assessment
2.18 Autopilot Engagement (ON)
PID Adjustments for Adaptive Mode Calibration:-
2.19 Initial Course Keeping Performance
2.20 Optimising the Rudder Control Setting
2.21 Optimising the Rudder Control Band
2.22 Loop Gain Calibration
2.23 Autotrim (Automatic Permanent Helm) Assessment
2.24 The Counter Rudder Control Setting
2.25 Optimising the Yaw Control Setting
Adaptive Mode Calibration:-
2.26 STW Speed Data Input (Speed through the Water)
2.27 SOG Speed Data Input (Speed over the Ground)
2.28 Draft Input (Laden State)
2.29 Calibration of Steering Performance & Override Controls vs
Speed
2.30 Calibration of Steering Performance vs Draft.
To Next Page
Loading...