Alphatron ALPHASEAPILOT MFC - The Cancel and Confirm Keys (Section 2.13); Using NT920 NFU Dodge and Power Steer (if Fitted)

To Next Page

To Previous Page

Operating manual ALPHASEAPILOT MFC Issue 1.1 Page 20 of 84

ALPHASEAPILOT MFC

1.20 The Cancel and Confirm Keys (

Section 2.13

)

The CANCEL (TURN/-) and CONFIRM (TURN/+) keys are

mainly concerned with new Autopilot headings which may

be automatically (Track Mode Waypoint Steering etc.) or

manually (Dodge/Custom Turns etc.) entered.

1.21 Using NT920NFU Dodge and Power Steer (if fitted)

NT920NFU

Operating Instructions: -

NB. The NT920NFU(s) will only function when the Autopilot “REMOTE” key is set to enable

Remote inputs (REMOTE key red corner LED on). If the “REMOTE” key is off (no red corner

LED) the NFU(s) will be disabled.