Operating manual ALPHASEAPILOT MFC Issue 1.1 Page 76 of 84
ALPHASEAPILOT MFC
Section 3: Display Messages, Alarms and Status
Indicators
The Autopilot system is comprehensively equipped with alarm mechanisms that continuously
monitor the operational integrity of a wide range of functions from heading input data to
steering gear response.
These are brought to the attention of the watch by audible and visual means as follows: -
3.1 Displays at Power Up (Self Test)
3.2 Failure Messages at Power Up (Self Test Failure)
3.3 Operational Display Messages
3.4 Alarm Display Messages
3.5 Operational Status LED’s
To Next Page
Loading...