EasyManua.ls Logo

Alpine CVA-1000E - Monitor Display Operation

Alpine CVA-1000E
187 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
English
Raising the Monitor
Press the OPEN/CLOSE button.
The unit beeps 3 times and raises the monitor
automatically.
Notes: If the monitor touches an obstacle while
being raised, the unit will beep for 2
seconds and stop raising the monitor
immediately. Should this occur, remove
the obstacle and press the OPEN/CLOSE
button again to raise the monitor.
When the movable display is opened, do
not place any object on the display and be
careful not to bump or apply any pressure
to the door while it is open. This can cause
damage to the mechanism.
Under low ambient temperature condi-
tions, the display may be dark for a short
period immediately after the power is
turned on. Once the LCD has warmed up,
the display will return to normal.
1
Basic Operation
Press the OPEN/CLOSE button.
The unit will beep 3 times and lower the monitor
automatically.
Note: If the monitor touches an obstacle while
it is being lowered, the unit will beep for
2 seconds and stop lowering the
monitor immediately.
Should this occur, remove the obstacle
and press the OPEN/CLOSE button
again to lower the monitor.
1
OPEN / CLOSE
OPEN / CLOSE
Lowering the Monitor

Table of Contents

Related product manuals