Safety
Page 14 of 100 Back-in-Box-Lift K70 / K90 / K90 ACTIVE
• An inspection must also be carried out by a technical
expert before the Back-in-Box-Lift is put back into ser-
vice if modifications are made to the construction or
major repairs are carried out on load-bearing parts of
the Back-in-Box-Lift.
• The Back-in-Box-Lift must not be operated in a faulty
condition, as severe injuries may be caused by this. If
faults occur, do not use the Back-in-Box-Lift until re-
pairs have been effected.
• Do not deposit any items on the Back-in-Box-Lift. Per-
sons can suffer injuries if such items fall off the platform.
• Switch the Back-in-Box-Lift OFF before carrying out
maintenance or repair work, this includes cleaning work.
Make certain that no other person can switch the Back-
in-Box-Lift ON (e.g. by disconnecting the starter bat-
tery). If this is not done, there is a risk of injury.
• Use only original spare parts or spare parts which have
been approved of by the manufacturer. If non-original or
unauthorised replacement parts are used, this will ren-
der the guarantee null and void.
1.8 Disposal
When the Back-in-Box-Lift's useful life has expired, it must
only be disposed of by qualified specialists. The manufac-
turer will accept no liability for damage caused by incorrect
disposal.
To Next Page
