AMF-BRUNS K90 ACTIVE - Inspection List

Inspection Log
Back-in-Box-Lift K70 / K90 / K90 ACTIVE Page 75 of 100
10.2 Inspection List
For a routine, yearly inspection by a technical expert (see information on page 73).
Mechanical parts
Fixtures on the vehicle
All fastening points on the vehicle are in a
perfect, tight condition
Pivoting elements
All bolts and screwed connections are in a
perfect, tight condition
General
Functional test and visual inspection of the
condition of the entire Back-in-Box-Lift
Hydraulic system
Power aggregate
Functional check of the valves
Hydraulic hoses
Inspect all hydraulic hoses and the burst pipe
protection for leaks
Connections in accordance with the wiring
diagram
Hydraulic cylinder
Check for leaks and functionality
Electrical system
Cable-connected remote control
Functional check
Bluetooth remote control (optional extra)
Functional check
Battery isolation switch
Functional check
Electrical drive for the roll-off guard (K70)
Functional check
Electrical cables
Inspection of the connections in accordance
with the electrical circuit diagram
Inspection of the cables for damage to the
insulation