DANGER!
Dangers when transporting the Back-in-Box-Lift.
The Back-in-Box-Lift can fall or start to slip during trans-
portation. There is a risk of personal injury and material
damage.
Therefore:
• The Back-in-Box-Lift must only be transported by per-
sonnel who have been trained or instructed.
•
The lifting gear used must be in a technically perfect
condition and must be adequately dimensioned.
• The Back-in-Box-Lift must be secured in every trans-
portation situation, such that it cannot present a risk.
• Remember that a Back-in-Box-Lift weighs up to 200
kg
(K90).
• Never stand under suspended loads.
NOTE
The AMF-
Bruns GmbH will accept no liability whatsoever
for damage or injury caused by incorrect transportation.
To Next Page
Loading...
