Maintenance and Repair
Back-in-Box-Lift K70 / K90 / K90 ACTIVE Page 53 of 100
7 Maintenance and Repair
7.1 Safety Regulations for Maintenance
and Repair
Read the safety information before carrying out mainte-
nance and repair work (see Chapter 1, page 8).
WARNING!
Risk of injury if protective and safety devices are removed
or are defective.
If protective and safety devices are removed, they will no
longer fulfil their function.
Therefore:
•
Always refit protective and safety devices if they have
been removed (e. g. for maintenance or repair purpos-
es).
• Never modify, bypass or remove p
rotective and safety
devices.
WARNING!
Danger through carrying out maintenance and repair work
incorrectly.
A number of risks of personal injury and material damage
can be caused if maintenance and repair work is not car-
ried out correctly.
Therefore:
•
Only allow specialist personnel to carry out maintenance
and repair work.
•
If repair work has been carried out on load bearing
parts, this must be inspected by a technical expert.
WARNING!
Risk of personal injury or material damage if inferior quality
spare parts are used.
The manufacturer will accept no liability whatsoever for
damage or injury caused by the use of non-original spare
parts or spare parts that have not been approved of by the
manufacturer.
Therefore:
• Use only original spare parts or spare parts that have
been approved of by the manufacturer.
To Next Page
Loading...
