Faults and Troubleshooting
Page 70 of 100 Back-in-Box-Lift K70 / K90 / K90 ACTIVE
9.3 Charging the Bluetooth Remote
Control Battery
ð Remove the cover from the USB connection on the re-
mote control (see Figure 16, page 24).
ð Connect the charging cable provided to the USB con-
nection on the remote control.
ð Connect the charging cable to one of the chargers pro-
vided.
ð Connect the charger to a corresponding outlet socket.
The charging procedure begins. The "State of Charge"
LED (9) lights up.
The "State of Charge" LED (9) goes out as soon as the
battery is fully charged.
ð Disconnect the charging cable from the USB connection
on the remote control.
ð Fit the cover to the USB connection.
ð Stow the charging cable and charger away.
To Next Page
Loading...
