AMF-BRUNS K90 ACTIVE - Page 25

Description
Back-in-Box-Lift K70 / K90 / K90 ACTIVE Page 25 of 100
Item
Designation
Function
6
"Switch Remote
Control OFF" but-
ton
Switches the Bluetooth re-
mote control OFF.
To switch the Bluetooth re-
mote control OFF: Press the
"Retract Position" (5) and the
"Switch Remote Control OFF"
buttons (6) simultaneously for
longer than 3 seconds.
7
Light sensor
Activates the button lighting in
adverse lighting conditions.
8
"Bluetooth" LED
Blinks once per second when
the connection to the receiver
has been established.
Colour of the LED: green.
9
"State of Charge"
LED
Indicates the state of charge
of the battery.
Blinks once per second: Re-
maining charge < 15 %.
Blinks twice per second: Re-
maining charge < 10 %.
Blinks three times per second:
Remaining charge < 5 %.
Lights continuously when the
battery is being charged.
Goes out when the battery is
charged.
Colour of the LED: red.
NOTE
The Bluetooth
remote control switches OFF automatically
after a certain time. The Bluetooth remote control can be
started again by pressing the "Retract" button (1) for long-
er than three seconds.