Emergency Mode
Back-in-Box-Lift K70 / K90 / K90 ACTIVE Page 51 of 100
ð Remove the plug that covers the opening through which
the latch can be released (see Figure 30, page 48 and
Figure 37).
Figure 37: Removing the Plug
ð Insert the hand pump lever or other suitable object
straight into the hole (see Figure 38). Press firmly in or-
der to unlatch the platform.
Figure 38: Releasing the Latch
Releasing the latch releases the platform.
ð Manually push the platform approx. 2 cm into the cas-
sette.
ð Remove the object from the hole.
ð Push the platform fully into the cassette.
ð Make certain that the latch engages.
ð If the platform does not latch in position in the cassette,
secure it against sliding out of the cassette using wire or
other suitable materials.
ð Replace the plug.
Opening for
releasing the
latch
To Next Page
