AMF S-311 - 3. BUTTONHOLE SHAPE SETTINGS

S-311
1-29
Released:01/2014
E-mail: service@amfreece.cz; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
D - MACHINE CONTROLS
3. THE BUTTONHOLE SHAPE SETTING
Tosetthebuttonhole,itisnecessarytosettheparametersofeye,therstandthesecondrowofstitchesandthe
bar.
3.1 - setting the parameters of the eye
- possible sizes of eye: 2,2x3,0; 2,8x4,2; 3,0x4,6; 3,2x5,0; 3,4x4,2;
No Eye or round eye by pressing surface A.
Return to main display
of buttonhole without eye
Return to main display
Round eyelet
AF
RDE
Number of
stitches in the eye
(range 4 - 20
stitches)
Eye start correction
-Y axis
(range ± 2.0)
Eye start correction
-X axis
(range ± 1.0)
Bedplate feeding
in the eye
(range 0 - 100)
Buttonhole
without eye
Number of stitches in the eye
(range 4 - 20 stitches)
Eye start correction
-Y axis (range ± 2.0)
Eye start correction
-X axis (range ± 1.0)
Feeding in the eye
(range 0 - 100)
Inner buttonhole diameter
(range 2.0 - 7.0 mm)
Inner buttonhole diameter
(range 2.0 - 3.5 mm)
Number of stitches in the buttonhole
(range 0 - 60 stitches)
Electronically adjustable
stitch bite (range ± 0.3 mm)
Bedplate feeding in the eye
(range 0 - 100)
Number of sew stitches
on the buttonhole end
(range 0 - 9 stitches)
Return to main round
eye display