ADAV4601 System Design Document Confidential Information
Rev.1 August 2009 Analog Devices Page 67
STEP-BY-STEP SAMPLE PROJECT CREATION
Here are the steps to follow in order to create a sample Application Layer project from scratch.
Application Layer Project Creation from SigmaStudio Project.
The user needs to create a project folder for the Application Layer, and then link it to a previously created
SigmaStudio project.
1.
Create a new project
2.
Import a SigmaStudio project
3.
Add cells to create new registers
a.
Depending on the cell, a different wizard will load
4.
Edit / delete registers if it's needed
5.
Compile and link the project
6.
Generate HTML and C code data
7.
Download the ROMs
To Next Page
Loading...
