8-4 Software Tools Anritsu Tool Box
8-4 PN: 10580-00252 Rev. K Site Master User Guide
easyTest Tools
easyTest Tools is used to create work instruction files that consist of a command sequence
and intructions to help less experienced personnel with operating the instrument in the field.
• A drag-and-drop tool facilitates the creation of a test sequence from a library of
commands.
• Instructions can be a mix of textual prompts and graphic images.
• Sample procedure files (.ett) are included with easyTest Tools.
• Command sequences are delivered electronically and loaded on the instrument, where
they are recalled with a press of a button.
• Recall Setup places the instrument in the proper mode for the measurement by
retrieving saved parameters such as measurement type, frequency and amplitude
settings, markers and limit lines.
• The current measurement setup or the screen display can be saved manually or
automatically.
easyMap Tools
easyMap Tools is the new name for Anritsu Map Master. The application allows users to find
and prepare geo-referenced maps and to build floor plans suitable for Anritsu Handheld
Spectrum Analyzers with Interference Analysis or Coverage Mapping capabilities (Option 25
or Option 431, respectively).
Software functions include:
• Creation of geo-referenced maps with pan and zoom capability
• Conversion of maps and floor plans to a form suitable for use on Anritsu Handheld
Spectrum Analyzers and Interference Analyzers
• Introduction of GPS information into previously non-geo-referenced maps
Wireless Remote Tools
Wireless Remote Tools enables the user to remotely monitor and control the instrument over
a wireless LAN connection.
• The wireless connection is typically established using a USB-powered Wi-Fi router
attached to the instrument and a matching Wi-Fi link on the PC end.
• Remote monitoring and control of the instrument enhance operator safety and
efficiency when conditions make it unsafe or impractical to be close to the instrument.
To Next Page
Loading...
