Channel Scanner (Option 27) 4-8 Scanner Menu
Spectrum Analyzer MG PN: 10580-00349 Rev. H 4-9
Scan Script Master Menu
Key Sequence: Scanner > Scan Script Master > Select Setup File > Scan Script Master
Select Test: Opens the Select Script Master Scan Setup File dialog to select
a script file for measurement use.
Repeat Scan Type #Scans/Time: Sets the scan to run through the number
of scans set using # of Repeat (List) or for the period of time set using Scan
Duration.
# of Repeats (List): Sets the number of scan repetitions for the # of Repeats
(Set).
Scan Duration: Sets the period of time channel scanning takes place for use
with Repeat Scan Type.
# of Repeats (Set): Sets the number of times each set of 20 channels are
scanned.
Record On/Off: Turns on the record mode. When the set # Scans are
completed or the set Time has ended, the measurements will be stored to
memory.
Start/Restart Test: Starts running a selected measurement or restarts a
measurement that is running.
Back: Returns to the “Scanner Menu” on page 4-7.
Figure 4-5. Channel Scanner Scan Script Master Menu
Start/Restart Test
Repeat Scan Type
# Scans Time
Record
On Off
Scan Script Master
Select Test
# of Repeats (List)
1000
Scan Duration
00:11:00
# of Repeats (Set)
5
Back
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
