Anritsu Spectrum Master MS2720T User Manual

W-CDMA/HSPA+ Signal Analyzer 3-5 Demodulator
3GPP MG PN: 10580-00234 Rev. T 3-19
10. Press the Codogram submenu key to activate the Codogram measurement.
11. Press the Codogram submenu key again to list the Codogram menu and set the zoom
and test time parameters for the measurement.
12. Press the Zoom submenu key to select the appropriate zoom level. The Zoom key toggles
between 32, 64, and 128.
13. Press the Zoom Start submenu key to manually enter the zoom start code.
14. Press the Total Time or Single Sweep Time submenu key to set the required time.
15. Press the Back submenu key to go back to the Codogram measurement.
Note
The blue color block on the Codogram screen represents the selected zoom codes
and the same codes are displayed in the zoom screen. Save the data before
making any measurements, otherwise the data will be lost.
Figure 3-10. Codogram Measurement
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

Anritsu Spectrum Master MS2720T Specifications

General

Brand	Anritsu
Model	Spectrum Master MS2720T
Category	Measuring Instruments
Language	English