Anritsu Spectrum Master MS2720T User Manual

2-4 CDMA RF Measurement Setup CDMA Signal Analyzer
2-4 PN: 10580-00235 Rev. D 3GPP2 MG
2-4 CDMA RF Measurement Setup
To make CDMA RF measurements, connect the instrument to the base station and follow
these setup instructions. Press the Measurements main menu key then the RF Measurements
submenu key to open the measurement menu.
Channel Spectrum Setup
This measurement displays the spectrum of the specified channel and channel power,
occupied bandwidth, and peak-to-average power.
From the Measurements main menu, use the following procedure for Channel Spectrum:
1. Press the RF Measurements submenu key to open the RF Measurements menu.
2. Press Channel Spectrum to display the active measurement (Figure 2-3).
Figure 2-3. RF Measurement, Channel Spectrum
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

Anritsu Spectrum Master MS2720T Specifications

General

Brand	Anritsu
Model	Spectrum Master MS2720T
Category	Measuring Instruments
Language	English