EVDO Signal Analyzer 3-5 EVDO Demodulator Measurements Setup
3GPP2 MG PN: 10580-00235 Rev. D 3-9
CDP Data Setup
CDP Data displays the data I (In phase) and Q (Quadrature phase) codes (Figure 3-7).
From the Demodulator menu, use the following procedure for CDP Data measurements:
1. Press the CDP Data submenu key to display the codes.
2. Press the CDP Data submenu key again to display the CDP Data submenu.
3. Press the CDP Units submenu key to select Relative power (in dB) or Absolute power
(in dBm).
Figure 3-7. EVDO CDP Data
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
