Chapter 2 —Fixed WiMAX Signal Analyzer 2-4 Fixed WiMAX RF Measurements
WiMAX MG PN: 10580-00236 Rev. D 2-7
RF Summary
The RF Summary displays the critical RF transmitter performance measurements in a table
format, without demodulating the WiMAX signal. The parameters that are displayed in the
RF summary table are Channel Power in dBm, Data Burst power in dBm, Preamble power
in dBm, Occupied Bandwidth, and Crest Factor.
Procedure:
1. Setup the measurement as described in “Setup for Fixed WiMAX RF Measurements” on
page 2-4.
2. Press the Measurements main menu key.
3. Press the RF submenu key.
4. Press the RF Summary submenu key to activate the measurement. The sample image in
Figure 2-4 may differ from any image on your instrument.
Figure 2-4. RF Summary
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
