59
D-STAR call sign is not
displayed.
・ Header of the
transmission has not
been received.
Especially during SCAN
and SEARCH, hitting a
signal in the middle of a
transmission is likely.
・Wait for the next transmission
(header) to be received and
decoded.
・If cause is unstable signal, try a
better location or larger antenna.
From, to, rep1, rep2
appears even though
it’s not a D-STAR
signal.
・Noise was mistaken
for a digital signal.
This is not a malfunction. Try a new
location with better signal to noise
ratio, or a larger antenna.
Boot up is hanging,
does not boot normally
to VFO screen.
・ System data not
loaded correctly.
Remove all power sources, wait 1
minute, reinsert the battery pack
and power on again.
LCD display seems
frozen.
・System data problem ・Reboot the receiver and do a
system reset.
To Next Page
Loading...
