APC Smart-UPS VT - Install XR Battery Enclosures (Option); Remove the Cable Landing Cover and Bottom Plates

InstallXRBatteryEnclosures(Option)
RemovetheCableLandingCoverandBottomPlates
WARNING:Beforecarryingoutthestepsbelow,thesystemmustbeintotalpower
offandthebatteriesmustberemoved.
ToaccessthecablelandingareaintheUPSandtheXRBatteryEnclosure(s),followthisprocedure:
1
4
3
2
1
4
3
2
XR Battery Enclosure UPS
1.LoosenthesixM4screwsfromthecablelandingcoverplateontheUPSandtheXRBattery
Enclosure(s)andthenremovetheplates.
2.Ininstallationswithbusbarconnections,removethescrewsfromthebottomplateontheUPS
andtheXRBatteryEnclosure(s)andthenremovetheplates.
3.Punchholesinthebottomoftheconduitboxestotthesizeoftheconduitpipes.
4.AttachthebottompartoftheconduitboxestothebackoftheUPSandtothebackoftheXR
BatteryEnclosurewithfourscrewseach(ifapplicable).
16
Smart-UPS™VT10–30kV A208/220VSingleandParallelInstallation
990–1598E-001