Dispensing Batches
78 FastPak EXP Operating Manual
Selecting a Range
Follow the steps below to select a range of bags to
dispense.
1. On the Batch Preview window, search for and
find the first bag in the range you want to
dispense.
2. Click Set Start Range.
3. Search for and find the last bag in the range you
want to dispense.
4. Click Set End Range.
5. Or, choose multiple ranges to dispense by
specifying ranges such as 20-40, 50-55, 3, 10,
60-62.
6. Click Apply.
7. Click Dispense.
The FastPak EXP will dispense only the bags within
the range(s) you selected.
Adding Filters
Click Add Filters (on the Batch Preview tab) to
specify which bags in the batch you want to dispense.
(This applies to non-consecutive bags.) Refer to the
figure which follows for more details.
To Next Page
Loading...