Askey NR xCell 46116A - Table 14. the Askey 5 G NR Small Cell CU Configuration

ASKEY COMPUTER CORPORATION
Chapter 3. The Askey 5G NR Small Cell Admin Website
NR xCell 46116A User Guide 38
Copyright © 2023, All Rights Reserved.
Table 14. The Askey 5G NR Small Cell CU Configuration
Items
Descriptions
Provision Method
The Provision Method should be Remote or Local.
1. The Remote provision method means that the remote server, e.g., ACS, will provision the
primary gNB configurations to the 5G NR Small Cell.
2. The Local provision method means that the 5G NR Small Cell will apply all the configurations
in the local files. Users can modify the primary gNB configurations on the Admin Web GUI.
gNB N2 IP/gNB N3 IP
The IP address of gNodeB. It should be the IP address of WAN port, SFP+ port, or one of the
VLAN interfaces. Support separately specifying the gNB local interface with AMF (N2 interface) and
the UPF (N3 interface) on the gNB configuration page. The IP address is the same value for the N2
and N3 interfaces by default.
Site(gNB) ID
It identifies a gNB within a PLMN.
gNB ID Length
The number of bits for encoding the gNB ID.
Cell ID
The physical-layer Cell ID of the signal. The number format
TAC
Tracking Area Code, an element of the tracking area identity (TAI) that serves to uniquely identify
the Tracking Area.
MCC
Mobile Country Code
MNC
Mobile Network Code
AMF IP
The Access and Mobility Management Function IP address to carry the signaling traffic
UE Inact Timer
Duration while UE has not received or transmitted any user data
Encrypt Algo
NEA (Encryption Algorithm for 5G). It supports the NEA0, NEA1, NEA2, and NEA3
Integrity Algo
EIA (EPS Integrity Algorithm). It supports the NIA1, NIA2, and NIA3