Aspect A-2000 BIS - Page 50

SECTION 3 OPERATING THE A-2000
______________________________________________________________________
3-20
Note:
Turning a limit alarm OFF differs from pressing the front panel [SILENCE]
in that OFF disables audible and visible alarms for the BIS alarm limit
only. The Alarm Silence key disables all audible alarms but does not
disable visual alarms.
To permanently save this change, use the “Save Settings” option in the Advanced Setup
Menu.
Alarm Suspend – This option, when set to ON, automatically disables alarm silencing
after 2 minutes. Alarm suspend is automatically activated when a BIS Extend Sensor is
in use or when ICU mode is on.
To change the Alarm Silence button to suspend (rather than cancel) the audible alarm:
1. Press [MENU/EXIT] to access the Setup Menu.
2. Highlight Advanced Setup using the up [↑] or down [↓] arrows.
3. Press [SELECT].
4. Highlight Alarm Menu using the up [↑] or down [↓] arrows.
5. Press [SELECT].
6. Highlight Alarm Suspend.
7. Press [SELECT] until ON appears in reverse video.
8. Press [MENU/EXIT] to exit the Alarm Menu.
To permanently save this change, use the “Save Settings” option in the Advanced Setup
Menu.
Return to Advanced Setup Menu - Returns to the previous menu.
1. Press the up [↑] or down [↓] arrows to highlight Return to Advanced Setup
Menu.
2. Press [SELECT] to re-display the Advanced Setup Menu.