CEC-Client and libCEC-AAEON require installing GDebi in order to run on Ubuntu.
This step is performed in Terminal (Command Line). In Terminal, enter the command:
sudo apt-get install gdebi
After the process is completed, libCEC can be installed. Run the installer
libcec4_4.0.4.1~bionic_amd64.deb from the deliverables folder. You may
be required to enter the administrator password, after which installation will occur
automatically.
Image 7: Successful Installation
To use libCEC with Kodi, simply install Kodi with the command:
sudo apt-get install kodi
2.4 Flashing DFU Firmware on STM Board – Windows
This section details the procedures for dropping the .dfu (Device Firmware Update)
firmware file on board and MCU’s firmware update for delivered firmware on Windows
platforms.
To Next Page
Loading...
