ATI Technologies d12 series - Revision N (7;15

ATI Series D12 Toxic Gas Transmitter with H10 Smart Sensor
Revision N (7/15) 75
00-1033 Phosphine, 0-10/200 PPM (10 PPM Standard)
00-1034 Phosphine, 0-200/2000 PPM (1000 PPM Standard)
00-1035 Silane, 0-10/200 PPM (10 PPM Standard)
00-1036 Iodine, 0-1/5 PPM (2 PPM Standard)
00-1037 Iodine, 0-5/200 PPM (20 PPM Standard)
00-1038 Acid gases, 0-10/200 PPM (20 PPM Standard)
00-1039 Ethylene oxide, 0-20/200 PPM (20 PPM Standard)
00-1040 Formaldehyde, 0-20/200 PPM (20 PPM Standard)
00-1041 Hydrogen, 0-500/2000 PPM (2000 PPM Standard)
00-1042 Hydrogen peroxide, 0-10/100 PPM (20 PPM Standard)
00-1043 Alcohol, 0-50/500 PPM (200 PPM Standard)
00-1044 Alcohol, 0-500/2000 PPM (2000 PPM Standard)
00-1057 Acetylene, 0-50/500 PPM (0-200 PPM Standard)
00-1169 Hydrogen peroxide, 200/2000 PPM (500 PPM Standard)
00-1181 NOx, 50/500 PPM (200 PPM Standard)
00-1285 Silane, 500/2000 PPB (1000 PPB Standard)
00-1349 Formaldehyde, 500/2000 PPM (1000 PPM Standard)
00-1358 Ozone, 200/1000 PPM (1000 PPM Standard)
00-1359 Chlorine dioxide, 200/1000 PPM (1000 PPM Standard)
00-1425 Chlorine dioxide, 1/5 PPM (low Cl2 response)
00-1450 Dimethylamine (DMA), 100/200 PPM (100 PPM Standard)
00-1455 Hydrogen bromide, 10/200 PPM (20 PPM Standard)
00-1469 Hydrogen sulfide, 200/1000 PPM (500 PPM Standard)
Table 24. C18 gas generators
Part No.
Description
00-1239 Chlorine
00-1240 Ammonia
00-1241 Carbon Monoxide
00-1243 Hydrogen Sulfide
00-1244 Sulfur Dioxide
Table 25. Duct mount sensor accessories
Part No.
Description
00-1388 H10 Duct Mount Adapter
00-1389 H10 Duct Mount Sensor Holder
46-0003 Sensor Gasket for (00-1389)
03-0290 Duct Mount Cable Assembly