EasyManua.ls Logo

Atlas Copco Dynapac F3030C

Atlas Copco Dynapac F3030C
300 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D30 8
Batteries
The batteries (1) of the 24 V system are
located in the vehicle footwell.
For the specifications, refer to
chapterB,
"Technical data". For maintenance, see
chapter "F".
External starting must only be carried
out according to the instructions (see
section "Starting the paver finisher,
external starting (starting aid)".
Main battery switch
The main battery switch separates the
current circuit from the battery to the
main fuse.
For the assignment of all fuses, see
chapter F.
- To interrupt the battery's current
circuit, turn the key pin (3) to the left
and pull it out.
Do not lose the key pin as in this case
the paver finisher

Table of Contents

Related product manuals