Atlas Copco Dynapac F3030C

F40 3
Item
Interval
Maintenance point Note
10 50
100 250 500
1000/annually
2000/every 2 years
5000
If necessary
1
- Outer auger bearing –
Lubricate
2
-
Mounting bolts –
Check tightening torque
-
Auger planetary gear –
Check oil level
-
Auger planetary gear –
Top up oil
- Auger planetary gear –
Change oil
3
-
Auger drive chains –
Check tension
-
Auger drive chains –
Adjust tension
4
-
Auger box –
Check oil level
- Auger box –
Top up oil
-
Auger box –
Change oil
5
- Seals and sealing rings –
Check wear
- Seals and sealing rings –
Replace seals
6
- Sprocket casing bolts –
Check tightening
- Sprocket casing bolts –
Tighten to correct torque
7
- Outer bearing bolts –
Check tightening
- Outer bearing bolts –
Tighten to correct torque
8
- Auger blade –
Check wear
- Auger blade –
Replace auger blade
Maintenance
Maintenance during the running-in period