F90 3
2.1 Maintenance interval
Note:
- Do not reach into the tank when the pump is running!
- The central lubrication system must only be operated with the safety valve
installed!
- Do not undertake any work on the pressure relief valve during operation!
- Risk of injury due to escaping lubricant, as the system operates at high
pressures!
- Observe safety regulations for handling hydraulic systems!
- Ensure maximum cleanliness when working on the central lubrication system!
Item
Maintenance point Note
10
50
100
250
500
1000/annually
2000/every 2 years
If necessary
1
lubricant level
Bleed central lubrication system
Check pressure limiting valve
at the consumer
2
Maintenance during the running-in period
To Next Page
Loading...
