F90 6
Bleed central lubrication system
Bleeding the lubrication system is necessary if the central lubrication system has
been operated with an empty lubricant tank.
Bleed central lubrication system:
- Release the main lubrication line (3) at the distributor (2).
- Start up the central lubrication system with the filled lubricant tank (1).
- Allow the pump to run until lubricant emerges from the previously released
main line (3).
- Reconnect the main line (3) to the distributor.
- Release all distribution lines (4) from the distributor.
- Reconnect all distribution lines as soon as lubricant has emerged.
- Check all connections and lines for leaks.