Atlas Copco Dynapac F3030C

F50 2
1.1 Maintenance intervals
Item
Interval
Maintenance point Note
10/daily
100
250
500
1000/annually
1500/every 1.5 years
2000/every 2 years
If necessary
1
- Fuel tank
Check filling level; top up if necessary
- Fuel tank
Clean the tank and system
2
- Engine lube oil system
Check oil level, top up if necessary
- Engine lube oil system
Change oil and oil filter
3
- Engine fuel system
Drain the water seperator
- Engine fuel system
Change the water separator filter
- Engine fuel system
Replace fuel filter
- Engine fuel system
Bleed fuel system
4
- Engine air filter
Check air filter and empty dust collector
- Engine air filter
Main filter clean / replace
- Engine air filter
Safety filter(replace when 3-5
maintenance interval to the
main filter)
Only
replace
- Engine air filter
Air intake - check
5
- Engine cooling system
Check level of coolant, top up if insufficient
- Engine cooling system
Change coolant
- Radiator and intercooler pipe
Check
- Cooling fan
Check
- Engine cooling system
Check / clean radiator
Maintenance
Maintenance during the running-in period