Atlas Copco Dynapac F3030C User Manual

B 14
5.6 Travel drive/traction unit
5.7 Engine F3030C
Make / type
Cummins QSB 6.7-C190 /
DCEC QSB 6.7-C190
Version
6-cylinder diesel engine (water-cooled)
Performance
142 kW / 190 hp (at 2200 rpm)
Pollutant emissions in
co-ordination with:
EU 3A / Tier 3
Fuel consumption, full load
Fuel consumption, 2/3 load
33.6 l/h
22.5 l/h
Fuel tank capacity
350 L
5.8 Hydraulic system
Pressure generation
Hydraulic pumps via distribution gear
(directly flanged to the engine)
Pressure distribution
Hydraulic circuits for:
-
Travel drive
-
Auger
-
Conveyor
-
Tamper / vibration
-
Operating functions
-
Separate hydraulic circuits for options
Hydraulic oil reservoir - volume (See chapter F)
5.9 Material compartment (hopper)
Volume
Approx.8m
3
= approx.17 t
Minimum inlet height, centre
525 mm
Minimum inlet height, outside
545mm
Hopper width, outside, open
3740mm
Drive
Hydrostatic drive, continuously
controllable
Drive unit
Two separately driven caterpillar drives
with rubber grouser chains
Turning capacity Turning on the spot
Speed
See above

Atlas Copco Dynapac F3030C Specifications

General

Brand	Atlas Copco
Model	Dynapac F3030C
Category	Construction Equipment
Language	English