Atlas Copco Dynapac F3030C User Manual

C11 3
Only when remote control is not connected.
Operation
Buttons
- Close the hopper lids.
- Engage both hopper transport
safeguards.
1 = Locking handle
2 = Locking latch
3 = hopper
- Lift the screed.
- Turn the preselector to “zero”.
- Extend levelling cylinders
completely.
- Set the drive lever to centre
position.
- Retract the screed parts until the
screed matches the basic width
of the paver finisher.

Atlas Copco Dynapac F3030C Specifications

General

Brand	Atlas Copco
Model	Dynapac F3030C
Category	Construction Equipment
Language	English